Verify that you are using the correct AHCI or RAID system drivers for your SATA option.Įnable SATA AHCI Support - enables the embedded chipset SATA controller for AHCI - THIS IS WHAT YOU NEEDĮnable SW RAID - enables the embedded chipset SATA controller for the HPE Smart Array S100iSR Gen10 SW RAID. Press the F9 key in the ProLiant POST screen.įrom the System Utilities, select System Configuration > System Options > SATA ControllerOptions > Embedded SATA Configuration > Enable SW RAID and press the Enter key. You must be inSoftware RAID mode to use the Smart Array S100i SR Gen10 SW RAID solution on the embedded SATAports. In iLO go to 'Remote Console & Media: and click on '.NET Console' You will now see whatever is on the server's screen. iso OS file to the computer you are using to interface with the server. The embedded SATA ports may be configured in AHCI mode or Software RAID mode. Once in iLO put in your uname and password and enter the iLO interface you are now logged into your server. ![]() ![]() Take out the Raid card, and connect the cables to the onboard controller, and do the flowing: PS: Also you cold try this, but look on you motherboard if you have any more 2 sff connectors.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |